Blitzkrieg Raptor Gen 1/2/3 LT Race Kit (2WD)

This kit bolts onto the lower a-arm pivot locations, but requires welding on new upper arm mounts to the frame. Fabrication is required to mount shock absorbers, bump stop mounts, and limit straps. Fabrication and installation should be completed by a professional. Only built to accept a 12-bolt style race hub, with 5 on 5.5" or 6 on 5.5 Lug pattern. 

• Tabbed and slotted boxed upper a-arms 
• Tabbed and slotted boxed lower a-arms with 1.5" uniballs
• Fabricated 4130 Upright w/ 1" uniball (designed to accept bolt-on snouts)
• Heim steering
• Fabricated tie rods
• MIG welded components
• All necessary bolts included
• All heims, uniballs, bushings/sleeves included
  
• Upper Control arm tabs included. 
• Runs 2.5" Coilover and 4" bypass
• Gen1 10-14, gen2, gen 3 17+

SPECIFICATIONS

• 93" Overall width
• 17+" useable wheel travel

Options:

• BMS 2.5" Race Hub
• Wilwood 12” Brake Kit: +$699

NOTE

• Shipping of large items/suspension kits is highly volatile. Shipping calculation at checkout is a base charge to complete order. Actual shipping will be calculated at the time of shipment. Additional charges are likely to be incurred
• ***Lead time may very depending on current production***